Standing Seam Roof Anchor Roof Jack Pro Pack

Part Number: Roof-Jack-Pro-Pack

Sale price$3,203.97 Regular price$3,416.00
  • Savings Call (888) 412-7289 for Volume Pricing
Pros Recommendation
This Roof Jack Pro Pack for includes eight SSRA1 non-penetrating standing seam roof anchors and four roof jack adapters which allow you to mount 2"x10" walkboards to over standing seam roof panels.
  • Availability:Usually Ships in 1-2 Days
    Need It Faster? Give us a call (888) 412-7289

* This anchor system is made up of several components (8 Standing Seam Roof Anchors and 4 Roof Jack Adapters) - Full List Below

* This kit was designed with the roofing contractor and solar installer in mind. It combines our popular 8 piece Contractor Pack and Torque Wrench Kits with 4 of our SSRA2 Roof Jack Adapters to allow for walkboard attachment on standing seam roofs

Standing Seam Roof Anchors

* These standing seam roof anchors are only 4.5 lbs each, making them one of the lightest 5,000 lb certified anchors on the market.

* Need it now or later? These anchors are usable as a temporary or permanent attachment points for increased flexibility.

* The patented, universal design works with over 500 standing steam roof panels without reassembly or modification. To see a complete list of compatible profiles, check out the panel matrix sheet below.

* These standing seam roof anchors are made of non-corrosive aluminum and stainless steel components and have been salt spray tested to meet the ANSI ASTM B-117 standard.

* These anchors have been OSHA/ANSI test to 5,000 lbs in all pull directions to increase ease of use.

** Anchors meet or Exceed all applicable OSHA Standards for fall protection anchor points.

Roof Jack Adapter

* They allow you to mount 2"x10" walkboards to over standing seam roof panels.

* The adapter plate simply mounts on top of a Standing Seam Roof Anchor(SSRA1) that has had the D-ring removed.

* It is constructed of solid 6061-T6 aluminum with stainless steel hardware.

* The adjustable height stabilizer legs provide a steady mounting bracket on hundreds of different seams.

* Brackets should be mounted every 8' with one worker allowed per 8' of walk board. The angle of the jack is adjustable to fit roofs up to 12/12 pitch.

* Each Roof Jack requires one Standing Seam Roof Anchor.


  • (8)Standing Seam Roof Anchors w/ D-Rings)
  • (8) packs of 12 stainless steel, Cupped Tip set screws (Installed)
  • (8) packs of 12 stainless steel, Nylon Tip set screws
  • (8) Owner's Manuals
  • (8) 3/16 Hex Bits
  • (4) SSRA2 Roof Jack Adapters (SSRA2 Instructions)
  • (1) Torque Wrench
  • (1) 1/4" drive x 3/16" hex bit
  • Part Number: Roof-Jack-Pro-Pack
    Manufacturer:Fall Protection Distributors
    Anchor Durability: Reusable/Temporary
    Fasteners:Not Required
    OSHA Standards: Meets All Applicable
    Roof Penetration:No

    Payment & Security

    American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    You may also like

    Recently viewed